No single pump suits every sludge. Compare candidates using the same media and duty data, not just nominal flow.
Set Common Comparison Conditions First
Record solids concentration and type, particle or fibre characteristics, viscosity data, temperature, flow range and discharge pressure. Note any variation in the media between batches. Sludge does not necessarily flow like clean water, and a single viscosity figure without its measurement conditions can be misleading.
For each candidate, request solids handling suitability, wetted materials, seal or elastomer compatibility, operating range, maintenance space and drive data. “Screw pump” is a broad term; a progressive cavity pump and other screw designs cannot be treated as the same product.
Compare Consequences, Not Slogans
Diaphragm, progressive cavity and centrifugal options can differ in pulsation, wear parts and operating limits. Ask for model-specific explanations rather than assuming a design can run dry or pass every fibre. Include piping and protection conditions in the comparison.
Submit your sludge description and duty range and KFE can coordinate a technical comparison. Without reliable rheology data, manufacturer testing or a specialist assessment may be needed before the selection is fixed.
Related industry: Water & Wastewater Treatment




