What Data to Add Before Selecting a Sewage Pump for Solids

Aerial view of a wastewater treatment plant with circular clarifiers, sludge scrapers and aeration tanks

A clean-water duty point does not fully describe sewage transfer. Particle size, concentration and behaviour affect solids passage, wear and the pipeline’s ability to carry the mixture.

Start by Describing What Is in the Water

Record the wastewater source, hard particles, fibres, rags, grit and how these change during operation, and state the basis of any measurement. “Contains solids” is less useful than a documented, specific description. If the maximum particle size is unknown, leave it as unknown rather than copying a catalogue limit.

Add the flow range, system head, liquid levels, temperature, installation and maintenance conditions. Ask the manufacturer to match solids passage and impeller information to the proposed configuration. The nominal discharge size is not a guaranteed solids passage size.

Compare the Whole Transfer Duty

Evaluate the pump and the pipeline together; particles may settle or build up when conditions change. An impeller name cannot guarantee the pump will never clog. Designers need to check the mixture, flow regime and operating range against the media data.

Submit your duty sheet and solids description and KFE can coordinate candidate data. If the wastewater composition is unclear, arrange sampling or a specialist assessment before fixing a specific model.

Related industry: Water & Wastewater Treatment

Related Products

Send Us Your Equipment List or Operating Conditions

Tell us what you need. KFE handles the quote, specs and delivery, with one contact for you.

Contact KFE