A pumping station includes inlet and outlet facilities, not just pumps. Counting only the pumps leaves important operating interfaces without an owner.
Start from the water source and the duty
Confirm the water source, solids content, level range, design flow and discharge requirements. Record normal, minimum and special operating conditions separately. Suction conditions affect selection, and the minimum inlet level must not be treated as the normal level without a design check.
Build the list by function: pumping, isolation and backflow prevention, level or pressure measurement, electrical control, and maintenance access. Even if lifting equipment and civil interfaces are outside the equipment supply, record who confirms them.
Use operating scenarios to find gaps
How does the system run when a duty pump is unavailable, a level signal fails, or the station is shut down for maintenance? Standby arrangements, protection and start/stop sequences should be defined by the designer; do not assume that adding one more pump automatically meets the requirement.
Attach the layout drawing, level data and control description to the equipment list. KFE can then coordinate pump and auxiliary equipment data. This checklist is for procurement review and does not replace hydraulic or civil design approval.
Related industry: Water Supply & Drainage




