Matching flanges requires a defined standard and complete dimensions, not just a familiar size and pressure rating. PN and Class are different rating systems, and simply converting the label does not prove two flanges can be safely joined.
Keep a mating check record
For each joint, record both tag numbers, the standard and its edition, nominal size, pressure rating, material, facing and bolt hole dimensions. Add the gasket type and size, the fasteners, and the applicable pressure-temperature limits from the formal data.
Results can be classed as “evidence matches”, “dimensional mismatch”, “rating unresolved” or “data missing”. For example, the same bore with a different bolt circle is a dimensional mismatch; it cannot be solved by forcing the bolts through.
Do not improvise on pressure-retaining joints
Without an approved engineering solution, joints should not be drilled, ground or pulled into position. A gasket that fits between the bolts is not necessarily suitable for the facing, fluid and temperature. Photos help with identification but cannot replace controlled drawings.
You can send KFE the drawings for both sides and the project connection specification, and we will coordinate the matching data; final joint design and allowable operating conditions still require professional review.
Related industry: Chemical & Pharmaceutical




