Motor power or pipe size cannot define a circulation pump. In a centrifugal pump system, the operating point is set by the pump curve and the system curve together.
Provide the Design Basis
Record the media and whether it contains glycol or another mixture, the temperature range, design flow, required head and the source of the data. In a closed loop, building height cannot simply be used as the circulation head; the actual system requirement is set by the designer.
Add suction pressure or existing suction data, normal and low-load conditions, the number of pumps and the changeover method. For replacement projects, attach the old model, its curve and measured operating data, not just the motor nameplate.
Check the Proposed Operating Range
Request the curve for the corresponding speed and impeller configuration, and ask whether the expected range meets the allowable operating region, suction requirements and motor load. Do not combine the maximum flow and maximum head from different points on a curve into a single duty.
Submit the duty sheet, system data and installation constraints and KFE can coordinate selection documents. The actual hydraulic selection and commissioning settings must be confirmed by the designer and manufacturer; a new motor does not automatically prove energy savings.
Related industry: HVAC




