How to Separate Procurement Requirements for HVAC Balancing Valves and Control Valves

Rooftop air-cooled chillers with red chilled water pipes, gate valves, strainers and thermometers

Balancing and active control are different tasks, and some products combine both functions. Even when a valve is labelled for HVAC, the hydraulic duty and control method still need checking.

State the Required Behaviour First

The designer should define whether each branch needs flow setting, measurement, differential pressure management or load-based control. Record design flow, pressure conditions, media mix and temperature. Active control also needs actuator power, control signal, feedback and fail position.

Do not assume a balancing valve can replace an actuated control valve. For combination products, request proof of each function and its applicable differential pressure range. “Pressure independent” does not mean there is no differential pressure limit.

Agree the Commissioning Evidence

For each branch, list the tag, target value, adjustment method, test points and recording requirements, and separate factory settings from data to be verified on site. Valve authority and related sizing conditions are confirmed by the system designer for the specific scheme; this article does not give a general sizing formula.

Submit your branch schedule and control description and KFE can coordinate valve data. Final balancing and control settings require professional commissioning.

Related industry: HVAC

Related Products

Send Us Your Equipment List or Operating Conditions

Tell us what you need. KFE handles the quote, specs and delivery, with one contact for you.

Contact KFE