A seal leak is a symptom, not a complete diagnosis. Replacing it without recording the operating conditions can lose the clues while leaving the original cause in place.
Build a Timeline Safely
Record the pump and seal identity, media, temperature, pressure, speed or control status and when the leak started, and add recent starts and stops, loss of liquid, cleaning, repairs and duty changes. Only photograph visible evidence from a safe position, follow the site isolation procedure and do not approach a hazardous leak.
Keep the correct seal arrangement and auxiliary system data. Different shaft seals have different leakage characteristics, and a general “zero leakage” is not an acceptance criterion for every design.
Assess Against the Manual
A qualified person should check lubrication or flushing, air ingress, dry-running history and material compatibility. These are lines of investigation, not a remote diagnosis. If the old parts need analysis, preserve them following the site’s safe handling procedure.
Send KFE the identity and event records and we can coordinate technical communication. Do not buy replacement parts on approximate dimensions alone; design, material and duty must match. Approval to restart remains a site responsibility.
Related industry: Water & Wastewater Treatment




