What to Record When a Circulation Pump Develops Noise or Vibration

Noise is not the only basis for diagnosing cavitation. Hydraulics, the motor, piping and structure-borne sound can all play a part, and useful evidence must be tied to the operating state.

Make Observations Comparable

Record the time, tag, speed, number of pumps running, valve positions, measured pressures and any available flow, and note where the noise is most noticeable and what changed before it started. Record the instrument and measuring point so that readings before and after can be compared.

For example, “noise clearly increases at the same measuring point after the second pump starts” is more useful than “the pump is noisy”. Do not change protection or approach rotating parts to make a recording.

Let Professionals Separate the Causes

A qualified person should compare the pump and system curves, suction conditions, alignment and support data. A recording alone cannot confirm bearing damage or cavitation. Fitting flexible connectors or reducing speed without review may still leave the cause unresolved.

Send KFE the event record, readings and installation data and we can coordinate technical communication. Follow site rules for abnormal shutdowns; this article does not approve continued operation of equipment at risk.

Related industry: HVAC

Related Products

Send Us Your Equipment List or Operating Conditions

Tell us what you need. KFE handles the quote, specs and delivery, with one contact for you.

Contact KFE