Connection size and heat duty alone cannot support a reliable selection. Both fluids, the allowable pressure drop and the cleaning method must be considered together.
Complete a Duty Sheet for Both Sides
For each side, record the media and concentration, flow, inlet temperature, required outlet temperature and allowable pressure drop, and add operating and design pressure and temperature with their meaning made clear. If the data does not close the heat balance, the designer should resolve it; do not change one value on your own.
State whether the fluids contain fibres, particles or fouling substances. Plate pattern and channel design affect both heat transfer and pressure drop, and a compact size does not prove suitability for dirty media.
Check Materials and Maintenance Space
Ask the manufacturer to state the selected plate, gasket and connection materials and any cleaning limits. For gasketed units, check the space needed to open the frame and remove plates. Where mixing of the two fluids would have serious consequences, the designer defines the separation arrangement.
Send KFE both duty sheets and layout constraints and we can coordinate manufacturers. Final thermal selection, pressure rating and material approval need the manufacturer’s duty calculation and project review.
Related industry: HVAC




